Project Info

Transmission-Mode Metasurfaces via Complex-Zero Engineering

patrice genevet
patrice.genevet@mines.edu

Project Goals and Description:

Recent advances in resonant photonics have revealed that the phase response of open electromagnetic systems is fundamentally governed by the complex singularity structure of their scattering operators, namely poles and zeros in the complex-frequency plane. Using this complex analysis framework associated to poles, zeros, and resonant phase singularities, we propose a new methodology for the design of transmission-mode metasurfaces. The key idea is that the transmission coefficient t(ω) is governed by the location of complex poles and zeros, and that a full 2π-transmission phase modulation emerges when a transmission zero approaches or crosses the real-frequency axis. The proposed design strategy consists of the following steps:

1- Use dielectric meta-atoms supporting electric and magnetic resonances (Huygens-type resonators) to ensure high forward transmission. 2-Identify the relevant symmetries 3-Determine mirror, rotational, and polarization symmetries that govern coupling to radiation channels and the existence of dark/bright modes. 4- Compute poles and zeros of the transmission coefficient using our simulation platform (proprietary codes and JCM code) 5- Analyze the complex-frequency singularity structure in transmission and locate transmission zeros relative to the operating frequency (Map singularity evolution to phase control). 6- Engineer symmetry breaking and introducing controlled asymmetry to move transmission zeros in the complex plane. 7- Use the motion of poles and zeros as the primary design variable to obtain the desired transmission phase profile with high efficiency.

This approach transforms metasurface design from a geometry-optimization problem into a singularity-engineering problem, where phase, dispersion, and transmission efficiency are directly controlled through the topology and symmetry of complex zeros. Such an approach could enable a new generation of transmissive metadevices with simultaneously high efficiency, dispersion control, polarization selectivity, and topological robustness, including metalenses, beam shapers, ultrafast modulators, and programmable non-Hermitian photonic platforms.

More Information:

Grand Challenge: Enhance virtual reality.
Our group is currently writing a couple of targeted reviews and low entry-level access to these concepts. These papers, including obvious literature (below) will be shared with the student.  
Light propagation with phase discontinuities: generalized laws of reflection and refraction
N Yu, P Genevet, MA Kats, F Aieta, JP Tetienne, F Capasso, Z Gaburro
science 334 (6054), 333-337 (2011)
Aberration-free ultrathin flat lenses and axicons at telecom wavelengths based on plasmonic metasurfaces
F Aieta, P Genevet, MA Kats, N Yu, R Blanchard, Z Gaburro, F Capasso
Nano letters 12 (9), 4932-4936 (2012)
Recent advances in planar optics: from plasmonic to dielectric metasurfaces
P Genevet, F Capasso, F Aieta, M Khorasaninejad, R Devlin
Optica 4 (1), 139-152 (2015)
Plasmonic topological metasurface by encircling an exceptional point
Q Song, M Odeh, J Zúñiga-Pérez, B Kanté, P Genevet
Science 373 (6559), 1133-1137 (2021)
Roadmap for optical metasurfaces
AI Kuznetsov, ML Brongersma, J Yao, MK Chen, U Levy, DP Tsai, ...
ACS photonics 11 (3), 816-865 (2024)
Crossing of the branch cut: the topological origin of a universal 2π‐phase retardation in non‐hermitian metasurfaces
R Colom, E Mikheeva, K Achouri, J Zuniga‐Perez, N Bonod, OJF Martin, ...
Laser & Photonics Reviews 17 (6), 2200976 (2023)

Primary Contacts:

patrice Genevet, Patrice.genevet@mines.edu Jeff Squier, jeff.squier@mines.edu  

Student Preparation

Qualifications

I am writing this proposal to support a student who worked in my group since his freshman year. The student has started acquiring the basic concepts and is now able to address real research problem. The student has been trained on nanofabrication and optical characterization of metasurface devices. This student is now able to start innovating on the design side , with the ambitious objective to complete a full cycle from design, modeling, fabrication and characterization.

TIME COMMITMENT (HRS/WK)

4hours per week is correct, currently the student has been spending signifcant amount of their time to this project.

SKILLS/TECHNIQUES GAINED

The student who will certainly be applying (and certainly be supported by the PI) has already been integrated into the group for the past two years through undergraduate research activities and has developed familiarity with the group’s simulation tools and research methodology. Students involved in this research would learn how to analyze and engineer photonic systems using the physics of complex analysis (the student specifically took complex analysis of poles, zeros, and non-Hermitian resonances this spring semester from the math curriculum). They would develop skills in electromagnetic simulation, symmetry analysis, and metasurface design for transmission-phase control. The project also provides training in modern nanophotonics concepts such as Huygens metasurfaces, modal interference, and topological phase engineering.

MENTORING PLAN

The mentoring plan will follow current mentoring scheme we already started since 2 years. We will extend our focus on progressively increasing scientific independence through regular one-on-one meetings, guided research milestones, manuscript preparation, and training in advanced concepts of resonant photonics and metasurface design.

Preferred Student Status

Junior
Senior
Share This